Paper | Title | Other Keywords | Page |
---|---|---|---|
TU2T1 | Collimation and Machine Protection for Low Emittance Rings | electron, simulation, photon, storage-ring | 196 |
|
|||
Funding: Work supported by Hard X-ray Sciences LDRD Project 2021-0119 and by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357. The reduced emittance and concomitant increase in electron beam intensity in Fourth Generation Storage Ring (4GSR) light sources lead to the challenging machine protection problem of how to safely dispose of the circulating charge during unplanned whole-beam loss events. Two recent experiments conducted to study the effects of 4GSR whole-beam dumps showed that damage to candidate collimator materials can be severe. This is a paradigm shift for SR light source machine protection. Typically the biggest threat to the machine is from CW synchrotron radiation. The choice of collimator material is important. High-Z, high-density materials such as tungsten may appear effective for stopping the beam in static simulations; however, in reality, short radiation lengths will cause severe destructive hydrodynamic effects. In our experiments, significant damage was observed even in low-Z aluminum. Thus unplanned, whole-beam dumps cannot be stopped in a single collimator structure. In this tutorial, alternatives such as multiple collimators and fan-out abort kicker systems will be discussed. Collimator design strategy and foreseen diagnostics for their operation will also be presented. |
|||
![]() |
|
||
please see instructions how to view/control embeded videos | |||
![]() |
Slides TU2T1 [16.661 MB] | ||
DOI • | reference for this paper ※ doi:10.18429/JACoW-IBIC2022-TU2T1 | ||
About • | Received ※ 08 September 2022 — Revised ※ 09 September 2022 — Accepted ※ 12 September 2022 — Issue date ※ 04 October 2022 | ||
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||